Specialty Fasteners Information

What is a Fastener?

A fastener is simply a device that mechanically closes or secures two or more objects together. In a nutshell, the use of a specialty fastener is to create non-permanent joints. All this means is that they can be removed or dismantled without damaging the joining components. If you would like to create a permanent joint, then you would turn to welding. But otherwise, fasteners can be plugged in and out depending on performance.

Specialty Fasteners Importance

4 Reasons Why Specialty Fasteners Are Important to Aerospace Industry

It is important to understand how to properly choose which specialty fasteners best suit your needs, because there are various aspects that are important to consider. Fasteners are important for many different industries, as they can be re-purposed for different applications. There are important aspects to consider when choosing the right fastener for your task.

1) Analyze the Cost of Specialty Fastener Market

Specialty fasteners are prevalent in the aerospace marketplace. Ultimately, this leads to some companies deciding that they can skimp on the cost of fasteners. However, that decision can produce poor results and increase the cost of manufacturing. You would have to constantly restart the process to use to the right screw once the old screw inevitably fails. By analyzing the cost, you are sure to find an appropriately priced custom fastener that will save you money in the long run.

2) Is the Price of Custom Fastener Necessary?

Some designs for a custom fastener can be great for certain applications, but they usually come with a higher price. Check to see if a standard fastener would work instead. By doing so, you will be saving money by avoiding the creation of a custom fastener when an ordinary fastener would do just fine.

3) Consider the End Use for Specialty Fasteners

When choosing the right fastener, it is important to factor in how you will use it. Different sorts of applications could use different sorts of specialty fasteners. Make sure you understand the quality of fastener needed, so you don't get a more expensive specialty fastener when a more basic one would also work.

4) Understand New Fastener Technologies

Open up the possibilities past the traditional fastener types. As a specialty fastener manufacturer and supplier, we are constantly innovating the industry with new ways to improve our products. Perhaps cutting-edge specialty fasteners is exactly what you need at your place of business. We partner with some of the best manufacturers in the United States in order to bring all of our customers the best fasteners and aerospace parts on the market.

Get Quote for Specialty Fasteners

If you have any questions about specialty fasteners, please get in touch with us. Specialty fasteners are a key part for many different aerospace applications and parts. Sesco Industries has years of experience distributing military parts to clients throughout the country. We are located at 110-19 15th Ave, College Point, New York. Over the years in business, we have become a leading fasteners supplier for many companies and businesses that rely on military and aerospace parts. Sesco industries can custom-make fasteners and gear them towards your industry, because we are a trusted specialty fastener manufacturer. Our customization with these specialty fasteners has turned us into a go-to place for many within the aerospace industry. Request a quote today!

Request a Quote!

Please reach out to us today and allow our expert staff to help address your needs. We will gladly answer any questions or concerns you may have about our specialty fasteners, or any other products on our site. We can provide you with a free quote for our products. As a nationwide supplier of affordable fasteners, we are proud to give you products at a price that will fit your budget. For more information about any of the aerospace products, please contact our aerospace division at Famsales. We proudly ship specialty fasteners for clients throughout the USA!

Common Uses of Specialty Fasteners in the Aerospace Industry

The aerospace industry relies heavily on specialty fasteners to ensure the safety, durability, and performance of aircraft and spacecraft. Unlike standard fasteners, specialty fasteners are engineered to withstand extreme temperatures, high vibration, heavy loads, and corrosive environments while meeting strict weight requirements. From commercial airplanes to satellites, specialty fasteners play a vital role in keeping critical systems secure.

1) Airframe Assembly

One of the most common uses of specialty fasteners is in aircraft structural assembly. Wings, fuselages, bulkheads, and support structures require high-strength fastening systems that can endure continuous stress throughout an aircraft's lifespan.

Specialty fasteners used in airframe applications provide:

Superior strength-to-weight ratios
Enhanced fatigue resistance
Long-term corrosion protection
Reliable structural integrity

2) Aircraft Engine Components

Aircraft engines operate in some of the harshest conditions found in aerospace applications. Specialty fasteners are used to secure turbine housings, compressor sections, exhaust systems, and other critical engine components.

These fasteners are often manufactured from advanced materials such as titanium, stainless steel, and nickel-based alloys to maintain performance under extreme heat and vibration.

3) Composite Aircraft Structures

Modern aircraft increasingly utilize lightweight composite materials to improve fuel efficiency. Because composites behave differently than traditional metals, they require specially designed fastening solutions.

Specialty fasteners help prevent material damage, reduce stress concentrations, and ensure proper load distribution in composite structures.

4) Landing Gear Systems

Landing gear assemblies experience significant impact forces during takeoff and landing. Specialty fasteners used in these systems must provide exceptional strength and reliability while maintaining resistance to corrosion and wear.

Applications include:

Landing gear struts
Wheel assemblies
Brake systems
Structural support components

5) Flight Control Systems

Aircraft flight controls depend on precision-engineered specialty fasteners to secure critical moving components. These systems include ailerons, elevators, rudders, and flaps that must function flawlessly under demanding operating conditions.

Fasteners used in flight control systems are designed to resist loosening caused by vibration and repeated movement.

6) Avionics and Electronic Equipment

Sensitive electronic systems require secure mounting and easy maintenance access. Specialty fasteners are commonly used in avionics compartments, communication systems, navigation equipment, and flight control computers.

7) Aircraft Interior Applications

Specialty fasteners are also essential throughout aircraft cabins. They secure passenger seats, overhead storage bins, interior panels, galley equipment, and other cabin components.

In these applications, fasteners must meet strict requirements for:

Fire resistance
Weight reduction
Durability
Ease of maintenance

8) Access Panels and Maintenance Areas

Routine inspections and maintenance are critical in aviation. Specialty fasteners allow technicians to quickly remove and reinstall access panels without compromising safety or performance.

Quick-release and captive fastening systems help reduce maintenance time while preventing loose hardware from entering sensitive aircraft systems.

9) Spacecraft and Satellite Construction

The aerospace sector extends beyond aviation into space exploration. Spacecraft and satellites rely on specialty fasteners that can perform in vacuum environments, withstand radiation exposure, and endure extreme temperature fluctuations.

These fasteners are commonly used to secure:

Solar panels
Antennas
Scientific instruments
Structural frames

Why Specialty Fasteners Matter in Aerospace

The aerospace industry demands the highest levels of safety and reliability. Specialty fasteners help manufacturers achieve these goals by providing superior strength, lightweight performance, vibration resistance, and long-term durability.

Whether securing an aircraft wing, supporting a jet engine, or holding critical satellite components in place, specialty fasteners are essential to modern aerospace engineering. As aircraft and spacecraft designs continue to evolve, the demand for advanced specialty fastening solutions will only continue to grow.

Quality Service & Price

At Sesco We Strive for Perfection